【Scope of application】
It is used to adjust the temperature and humidity of various textiles before testing the physical and mechanical properties.
【Related standards】
GB6529, ASTM D 1776, etc.
【technical parameter】
1. Test environment conditions: when the ambient temperature is +5~+28℃, relative humidity is ≤85%, and there is no sample in the test box
2. Temperature range: -(40)℃～+150℃
3. Control accuracy Temperature: ±0.2℃ Humidity: ±2.5% (refers to the difference between the set value of the controller and the actual measured value of the controller)
4. Temperature fluctuation: ≤0.5℃ (the temperature fluctuation is half of the difference between the highest temperature and the lowest temperature measured at the center point)
5. Temperature error: ≤±1℃ (the average temperature displayed by the studio temperature controller minus the average temperature measured at the center point)
6. Temperature uniformity: ≤2.0℃ (temperature uniformity is the arithmetic average of the difference between the highest temperature and the lowest temperature measured in each test)
7. Heating time: 3℃/min (non-linear no-load)
8. Cooling time: 0.75~1℃/min (non-linear no-load)
9. Nominal internal volume: (80)
10. Inner box size: W(400)mm×H(500)mm×D(400)mm
11. Dimensions: W(600)mm×H(1410)mm×D(1070)mm
12. Weight: (200)KG
Service hotline：
Receipt mail：
