【Scope of application】
YG021HL chemical fiber filament electronic strength tester is used to test the breaking strength and breaking elongation of synthetic fiber monofilament, spandex, nylon, polyester filament, multifilament and textured yarn.
【Related standards】
GB/T14344, ISO2062, GB/T3916, ASTM D2256, DIN BS, etc.
【technical parameter】
1. Test method: Elongation at constant speed, measuring the breaking strength and elongation of the sample, and recording the peak strength, breaking elongation, breaking strength and breaking elongation, etc.
2. Force measuring system: resistance strain load cell and 16-bit high-speed AD conversion chip
3. Sampling frequency: 1000Hz
4. Force measuring range and minimum division value:
5. Force measurement accuracy: ≤±0.02%F•S
6. Drive mode: stepper motor drive
7. Stretching speed: 10～3000mm/min, adjustable
8. Sampling length: 50～500mm, adjustable
9. Clamping method: pneumatic clamping
10. Print output: A4 format Chinese report/curve
11. Communication interface: RS232, 115200 baud rate
12. Power supply: Ac220V±10% 50Hz
13. Rated power: 150W
14. Weight: about 50Kg
15. Dimensions: 520×400×1600mm
Service hotline：
Receipt mail：
